Classic Running-in Oil
DESCRIPTION:
SAE 30 running in oil for classic engines.
Highest quality solvent refined mineral base stocks treated with specially designed additive system.
APPLICATION:
Use as received for initial running in of re-built engines.
Formulated for running in on the road.
Can be used for test bed running.
Run engine at peak torque to ensure maximum bedding-in of piston rings.
Drain and refill with the Millers Classic lubricant most suitable for the engine
USER BENEFITS:
• High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
• Provides full protection to highly stressed valve gear and associated components whilst allowing piston rings to bed in against the bore.
• Suitable for limited road use [500 miles] after which it should be replaced with the appropriate Millers Classic Engine Oil.
• Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
• Note: Do not use high performance oils before the bedding-in process is complete.
PERFORMANCE PROFILE:
• Designed to provide the performance of API SE/CC.
• Suitable for 500 miles road use.
• Very low leak down [4%] obtained after thorough running in process.
TYPICAL CHARACTERISTICS:
SAE Viscosity Grade ... 30
Specific Gravity @ 15°C ... 0.887
Kinematic Viscosity @ 100°C ... 11.9cSt
Kinematic Viscosity @ 40°C ... 104cSt
Viscosity Index ... 103
Flashpoint °C ... 220
